Reference Guide

Command
Modes
CONFIGURATION (conf-lldp)
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
debug lldp interface – debugs LLDP.
show lldp neighbors – displays the LLDP neighbors.
show running-config lldp – displays the LLDP running configuration.
advertise med voice-signaling
Configure the system to advertise when voice control packets use a separate network policy than voice
data.
S5000
Syntax
advertise med voice-signaling {vlan-id} | {priority-tagged
number}
To return to the default, use the no advertise med voice-signaling
{vlan-id} | {priority-tagged number} command.
Parameters
vlan-id Enter the VLAN ID. The range is 1 to 4094.
priority-tagged
number
Enter the keywords priority-tagged followed the Layer 2
priority. The range is 0 to 7.
Defaults unconfigured.
Command
Modes
CONFIGURATION (conf-lldp)
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
debug lldp interface – debugs LLDP.
show lldp neighbors – displays the LLDP neighbors.
show running-config lldp – displays the LLDP running configuration.
Link Layer Discovery Protocol (LLDP)
913