Reference Guide

Parameters
coordinate-
based value
Enter the keywords coordinate-based followed by the
coordinated based location in hexadecimal value of 16 bytes.
civic-based
value
Enter the keywords civic-based followed by the civic
based location in hexadecimal format. The range is 6 to 255
bytes.
ecs-elin value Enter the keywords ecs-elin followed by the Emergency
Call Service (ecs) Emergency Location Identification Number
(elin) numeric location string. The range is 10 to 25
characters.
Defaults unconfigured.
Command
Modes
CONFIGURATION (conf-lldp)
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
• ECS — Emergency call service such as defined by TIA or the national
emergency numbering association (NENA)
• ELIN — Emergency location identification number, a valid North America
Numbering Plan format telephone number supplied for ECS purposes.
Related
Commands
debug lldp interface – debugs LLDP.
show lldp neighbors – displays the LLDP neighbors.
show running-config lldp – displays the LLDP running configuration.
advertise med power-via-mdi
Configure the system to advertise the Extended Power via MDI TLV.
S5000
Syntax
advertise med power-via-mdi
To return to the default, use the no advertise med power-via-mdi command.
Defaults unconfigured.
Command
Modes
CONFIGURATION (conf-lldp)
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Advertise the Extended Power via MDI on all ports that are connected to an 802.3af
powered, LLDP-MED endpoint device.
Link Layer Discovery Protocol (LLDP)
909