Reference Guide

advertise med guest-voice-signaling
Configure the system to advertise a separate limited voice service for a guest user when the guest voice
control packets use a separate network policy than the voice data.
S5000
Syntax
advertise med guest-voice-signaling {vlan-id layer2_priority
DSCP_value} | {priority-tagged number}
To return to the default, use the no advertise med guest-voice-signaling
{
vlan-id layer2_priority DSCP_value} | {priority-tagged number}
command.
Parameters
vlan-id Enter the VLAN ID. The range is 1 to 4094.
layer2_priority Enter the Layer 2 priority. The range is 0 to 7.
DSCP_value Enter the DSCP value. The range is 0 to 63.
priority-tagged
number
Enter the keywords priority-tagged followed the Layer 2
priority. The range is 0 to 7.
Defaults unconfigured.
Command
Modes
CONFIGURATION (conf-lldp)
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
debug lldp interface – debugs LLDP.
show lldp neighbors – displays the LLDP neighbors.
show running-config lldp – displays the LLDP running configuration.
advertise med location-identification
Configure the system to advertise a location identifier.
S5000
Syntax
advertise med location-identification {coordinate-based value |
civic-based value | ecs-elin value}
To return to the default, use the no advertise med location-
identification {coordinate-based value | civic-based value |
ecs-elin value} command.
908
Link Layer Discovery Protocol (LLDP)