Reference Guide

show lldp neighbors
Display LLDP neighbor information for all interfaces or a specified interface.
S5000
Syntax
show lldp neighbors [interfacetype slot/port] [detail]
Parameters
interfacetype
slot/port
(OPTIONAL) Enter theinterface keyword followed by
interface type and slot/port information:
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
detail (OPTIONAL) Enter the keyword detail to display all the TLV
information, timers, and LLDP tx and rx counters.
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Omitting the keyword detail displays only the remote chassis ID, Port ID, and
Dead Interval.
Example
R1(conf-if-te-1/31)#do show lldp neighbors
Loc PortID Rem Host Name Rem Port Id Rem Chassis Id
--------------------------------------------------------------
Te 1/21 R2 TenGigabitEthernet 2/11 00:01:e8:06:95:3e
Te 1/31 R3 TenGigabitEthernet 3/11 00:01:e8:09:c2:4a
show lldp statistics
Display the LLDP statistical information.
S5000
Syntax
show lldp statistics
Defaults none
Command
Modes
EXEC Privilege
Link Layer Discovery Protocol (LLDP)
905