Reference Guide

• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
clear lldp neighbors
Clear LLDP neighbor information for all interfaces or a specific interfaces.
S5000
Syntax
clear lldp neighbors {interface type slot/port}
Parameters
interface type
slot/port
Enter the interface keyword followed by the interface
type and slot/port information. Valid slot numbers are 0-11.
The valid port numbers for each interface type are listed
below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
900
Link Layer Discovery Protocol (LLDP)