Reference Guide

disable
Return to EXEC mode.
S5000
Syntax
disable [level]
Parameters
level (OPTIONAL) Enter a number for a privilege level of the Dell
Networking OS. Range: 0 to 15. Default: 1.
Defaults 1
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
do
Allows the execution of most EXEC-level commands from all CONFIGURATION levels without returning
to the EXEC level.
S5000
Syntax
do command
Parameters
command Enter an EXEC-level command.
Defaults No default behavior.
Command
Modes
• CONFIGURATION
• INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following commands are not supported by the do command:
• enable
• disable
• exit
• config
Example
Dell(conf-if-te-5/0)#do clear counters
Clear counters on all interfaces [confirm]
90
Control and Monitoring