Reference Guide

advertise management-tlv
Advertise management TLVs (Type, Length, Value).
S5000
Syntax
advertise management -tlv {system-capabilities | system-
description | system-name}
To remove advertised management TLVs, use the no advertise management -
tlv {system-capabilities | system-description | system-name}
command.
Parameters
system-
capabilities
Enter the keywords system-capabilities to advertise the
system capabilities TLVs.
system-
description
Enter the keywords system-description to advertise the
system description TLVs.
system-name Enter the keywords system-description to advertise the
system description TLVs.
Defaults none
Command
Modes
CONFIGURATION (conf-lldp)
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
All three command options—system-capabilities, system-description,
and system-name—can be invoked individually or together, in any sequence.
clear lldp counters
Clear LLDP transmitting and receiving counters for all physical interfaces or a specific physical interface.
S5000
Syntax
clear lldp counters interface type slot/port
Parameters
interface type
slot/port
Enter the interface keyword followed by the interface
type and slot/port information. Valid slot numbers are 0-11.
The valid port numbers for each interface type are listed
below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
Link Layer Discovery Protocol (LLDP)
899