Reference Guide

If you disable FEFD globally (no fefd-global), the system does not remove the
FEFD interface configuration.
Related
Commands
• fefd – enables far-end failure detection.
• fefd-global interval – configures an interval between FEFD control packets.
• show fefdshow fefd – shows the FEFD command output.
fefd-global interval
Configure an interval between FEFD control packets.
S5000
Syntax
fefd-global interval seconds
To return to the default value, use the no fefd-global interval command.
Parameters
seconds Enter a number as the time between FEFD control packets.
The range is 3 to 300 seconds. The default is 15 seconds.
Defaults 15 seconds
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
• fefd – enables far-end failure detection.
• fefd-global – enables FEFD globally on the system.
fefd interval
Set an interval between control packets.
S5000
Syntax
fefd interval seconds
To return to the default value, use the no fefd interval command.
Parameters
seconds Enter a number as the time between FEFD control packets.
The range is 3 to 300 seconds. The default is 15 seconds.
892
Layer 2