Reference Guide

• MAC address aging time
• IP address
id vlan-id (OPTIONAL) Enter the keyword id followed by a number
from 1 to 4094. Only information on the VLAN specified is
displayed.
name vlan-
name
(OPTIONAL) Enter the keyword name followed by the name
configured for the VLAN. Only information on the VLAN
named is displayed.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following describes the show vlan command shown in the Example below.
Column
Heading
Description
(Column 1 —
no heading)
• asterisk symbol (*) = Default VLAN
• G = GVRP VLAN
• P = primary VLAN
• C = community VLAN
• I = isolated VLAN
NUM Displays existing VLAN IDs.
Status Displays the word Inactive for inactive VLANs and the word
Active for active VLANs.
Q
• Displays G for GVRP tagged
• M for member of a VLAN-Stack VLAN
• T for tagged interface
• U (for untagged interface)
• x (not capitalized x) for Dot1x untagged
• X (capitalized X) for Dot1x tagged
Ports Displays the type, slot, and port information.
• Gi = gigabit ethernet
• Te = 10 gigabit ethernet
• Fo = 40 gigabit ethernet
• Po = port channel
884
Layer 2