Reference Guide

Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
To display information about a named VLAN, enter the show vlan command with
the name parameter or the show interfaces description command.
Related
Commands
description – assigns a descriptive text string to the interface.
interface vlan – configures a VLAN.
show vlan – displays the current VLAN configurations on the switch.
show config
Display the current configuration of the selected VLAN.
S5000
Syntax
show config
Command
Modes
INTERFACE VLAN
Command
History
Version 9.0(1.3) Introduced on the S5000.
Example
Dell(conf-if-vl-100)#show config
!
interface Vlan 100
no ip address
no shutdown
Dell(conf-if-vl-100)#
show vlan
Display the current VLAN configurations on the switch.
S5000
Syntax
show vlan [brief | id vlan-id | name vlan-name]
Parameters
brief (OPTIONAL) Enter the keyword brief to display the
following information:
• VLAN ID
• VLAN name (left blank if none is configured)
• Spanning Tree Group ID
Layer 2
883