Reference Guide

Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
To return VLAN 1 as the Default VLAN, use this command syntax (default-vlan-
id 1).
The Default VLAN contains only untagged interfaces.
Related
Commands
interface vlan – configures a VLAN.
default-vlan disable
Disable the default VLAN so that all switchports are placed in the Null VLAN until they are explicitly
configured as a member of another VLAN.
S5000
Defaults Enabled.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
no default vlan disable is not listed in the running-configuration, but when
the default VLAN is disabled,
default-vlan disable is listed in the running-
configuration.
name
Assign a name to the VLAN.
S5000
Syntax
name vlan-name
To remove the name from the VLAN, use the no name command.
Parameters
vlan-name Enter up to 32 characters as the name of the VLAN.
Defaults Not configured.
Command
Modes
INTERFACE VLAN
882
Layer 2