Reference Guide

Occasionally, while sending broadcast traffic over multiple Layer 3 VLANs, the VRRP state of a VLAN
interface may continually switch between Master and Backup.
NOTE: For more information, refer to VLAN Stacking and VLAN-related commands, such as
portmode hybrid in the Interfaces chapter.
description
Add a description about the selected VLAN.
S5000
Syntax
description description
Parameters
description Enter a text string description to identify the VLAN (80
characters maximum).
Defaults none
Command
Modes
INTERFACE VLAN
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
show vlan – displays the VLAN configuration.
default vlan-id
Specify a VLAN as the Default VLAN.
S5000
Syntax
default vlan-id vlan-id
To remove the default VLAN status from a VLAN and VLAN 1 does not exist, use the
no default vlan-id vlan-id syntax.
Parameters
vlan-id Enter the VLAN ID number of the VLAN to become the new
Default VLAN. The range is 1 to 4094. The default is 1.
Defaults The Default VLAN is VLAN 1.
Command
Modes
CONFIGURATION
Layer 2
881