Reference Guide

• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
in | out Identify whether the ACL is applied on the ingress or egress
side.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
MAC Accounting information can be accessed using SNMP via the Force10
MONITOR MIB. For more information about enabling SNMP, refer to the Dell
Networking OS Configuration Guide.
NOTE: Currently, the Force10 MONITOR MIB does not return the MAC
addresses in an increasing order using SNMP. As a workaround, you can use
the -C c option in snmpwalk or snmpbulkwalk to access the Force10
MONITOR MIB. For example: % snmpwalk -C c -v 2c -c public 133.33.33.131
enterprise.6027.3.3.3
Example
Dell#show mac accounting access-list WORD interface
tengigabitethernet 0/1 in
Destination Out Port VLAN Packets Bytes
00:44:00:00:00:02 Te 11/0 1000 10000 5120000
00:44:00:00:00:01 Te 11/0 1000 10000 5120000
00:22:00:00:00:00 Te 11/0 1000 10000 5120000
00:44:00:00:00:02 Te 11/0 2000 10000 5120000
00:44:00:00:00:01 Te 11/0 2000 10000 5120000
Dell#
Related
Commands
show mac accounting access-list – displays the MAC access list configurations and
counters (if configured).
Layer 2
879