Reference Guide

To convert the sticky MAC addresses to dynamic MAC addresses, use the no mac
learning-limit command.
Parameters
mac-address-
sticky
Configures the dynamic MAC addresses as sticky on an
interface.
Defaults none
Command
Modes
INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
If you configure mac-learn-limit and the sticky MAC feature is enabled,
dynamically-learned MAC addresses are converted to sticky for that port. Any new
MAC address that is learned also becomes sticky for that port.
Related
Commands
show mac learning-limit – Displays the details of the mac learning-limit.
mac learning-limit station-move-violation
Specify the actions for a station move violation.
S5000
Syntax
mac learning-limit station-move-violation {log | shutdown-both
| shutdown-offending | shutdown-original}
To disable a configuration, use the no mac learning-limit station-move-
violation
command, followed by the configured keyword.
Parameters
log Enter the keyword log to generate a syslog message on a
station move violation.
shutdown-both Enter the keyword shutdown to shut down both the original
and offending interface and generate a syslog message.
shutdown-
offending
Enter the keywords shutdown-offending to shut down
the offending interface and generate a syslog message.
shutdown-
original
Enter the keywords shutdown-original to shut down the
original interface and generate a syslog message.
Defaults none
Command
Modes
INTERFACE (conf-if-interface-slot/port)
Layer 2
873