Reference Guide

• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
vlan vlan-id Enter the keyword vlan followed by a VLAN ID number from
1 to 4094.
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
mac-address-table aging-time
Specify an aging time for MAC addresses to be removed from the MAC address table.
S5000
Syntax
mac-address-table aging-time seconds
Parameters
seconds Enter either zero (0) or a number as the number of seconds
before MAC addresses are relearned. To disable aging of the
MAC address table, enter 0.
Defaults 1800 seconds
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
mac learning-limit – sets the MAC address learning limits for a selected interface.
show mac-address-table aging-time – displays the MAC aging time.
868
Layer 2