Reference Guide

banner motd
Set a message of the day (MOTD) banner.
S5000
Syntax
banner motd c line c
Parameters
c Enter the keywords banner motd, then enter a character
delimiter, represented here by the letter c. Press ENTER.
line Enter a text string for your banner message, ending the
message with a delimiter character. In the example below,
the delimiter is a percent sign (%). Range: maximum 50 lines,
up to 255 characters per line.
Defaults No banner is configured.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
A MOTD banner message is displayed only in EXEC Privilege mode after entering
the enable command followed by the password. These banners are not displayed
to users in EXEC (non-privilege) mode.
Related
Commands
banner exec – enables the display of a text string when you enter EXEC mode.
banner login – sets a banner to be displayed after successful login to the system.
cam-audit stack-unit
Enable audit of the IPv4 and IPv6 forwarding table on all stack-units.
Syntax
cam-audit stack-unit [all | ipv4-fib | ipv6-fib] interval time-
in-minutes
Parameters
all Enter the keyword all to enable CAM audit on all stack-
units.
ipv4-fib Enter the keyword ipv4-fib to designate the CAM audit on
the IPv4 forwarding entries.
ipv6-fib Enter the keyword ipv6-fib to designate the CAM audit on
the IPv6 forwarding entries.
86
Control and Monitoring