Reference Guide

• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
• For a VLAN interface, enter the keyword vlan followed
by a VLAN id number from 1 to 4094.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following describes the show isis traffic command output shown in the
Example below.
Table 8. Output Fields for the show isis traffic
Command
Field Description
Level-1/Level-2 Hellos (sent/rcvd) Displays the
number of Hello
packets sent and
received
.
PTP Hellos (sent/rcvd) Displays the
number of point-
to-point Hellos
sent and received
.
Level-1/Level-2 LSPs sourced (new/
refresh)
Displays the
number of new and
refreshed LSPs
.
Level-1/Level-2 LSPs flooded (sent/
rcvd)
Displays the
number of flooded
LSPs sent and
received
.
Level-1/Level-2 LSPs CSNPs (sent/
rcvd)
Displays the
number of CSNP
LSPs sent and
received
.
Level-1/Level-2 LSPs PSNPs (sent/
rcvd)
Displays the
number of times
designated router
elections ran
.
856
Intermediate System to Intermediate System (IS-IS)