Reference Guide

metric metric-
value
(OPTIONAL) The value used for the redistributed route. Use a
metric value that is consistent with the destination protocol.
The range is 0 to 16777215. The default is 0.
metric-type
{external|
internal}
(OPTIONAL) The external link type associated with the
default route advertised into a routing domain. The two
options are:
• external
• internal
route-map
map-name
map-name is an identifier for a configured route map. The
route map filters imported routes from the source routing
protocol to the current routing protocol.
If you do not specify a map-name, all routes are
redistributed. If you specify a keyword, but fail to list route
map tags, no routes are imported.
Defaults IS-IS Level 2 routes only
Command
Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
BGP to IS-IS redistribution supports “match” options using route maps. You can set
the metric value, level, and metric-type of redistributed routes by the redistribution
command. You can “set” more advanced options using route maps.
Example
Dell(conf)#router is
Dell(conf-router_isis)#redistribute bgp 1 level-1 metric 32
metric-type
external route-map rmap-isis-to-bgp
Dell(conf-router_bgp)#show running-config isis
!
router isis
redistribute bgp 1 level-1 metric 32 metric-type external
route-map
rmap-isis-to-bgp
844
Intermediate System to Intermediate System (IS-IS)