Reference Guide

To return to a single topology configuration, use the no multi-topology
[transition] command.
Parameters
transition
Defaults Disabled
Command
Modes
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6
Command
History
Version 9.0(1.3) Introduced on the S5000.
net
Use this mandatory command to configure an IS-IS network entity title (NET) for a routing process. If you
did not configure a NET, the IS-IS process does not start.
S5000
Syntax
net network-entity-title
To remove a net, use the no net network-entity-title command.
Parameters
network-
entity-title
Specify the area address and system ID for an IS-IS routing
process. The first 1 to 13 bytes identify the area address. The
next 6 bytes identify the system ID. The last 1 byte is the
selector byte, always identified as zero zero (00). This
argument can be applied to an address or a name.
Defaults Not configured.
Command
Modes
ROUTER ISIS
Command
History
Version 9.0(1.3) Introduced on the S5000.
840
Intermediate System to Intermediate System (IS-IS)