Reference Guide

Command
Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command
History
Version 9.0(1.3) Introduced on the S5000.
metric-style
Configure a router to generate and accept old-style, new-style, or both styles of type, length, and values
(TLV).
S5000
Syntax
metric-style [level-1 | level-2]
To return to the default values, use the no metric-style [level-1 |
level-2] command.
Parameters
level-1 Enables the metric style on Level 1.
level-2 Enables the metric style on Level 2.
Command
Modes
ROUTER ISIS
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
If you enter the metric-style wide command, the Dell Networking OS
generates and accepts only new-style TLVs. The router uses less memory and
other resources rather than generating both old-style and new-style TLVs.
The new-style TLVs have wider metric fields than old-style TLVs.
Related
Commands
isis metric – use this command to configure a metric for an interface.
multi-topology
Enables multi-topology IS-IS. It also allows enabling/disabling of old and new style TLVs for IP prefix
information in the LSPs.
S5000
Syntax
multi-topology [transition]
Intermediate System to Intermediate System (IS-IS)
839