Reference Guide

distribute-list out
Suppress network prefixes from being advertised in outbound updates.
S5000
Syntax
distribute-list prefix-list-name out [connected | bgp as number
| ospf process-id | rip | static]
To return to the default values, use the no distribute-list prefix-list-
name out [bgp as number connected | ospf process-id | rip |
static] command.
Parameters
prefix-list-
name out
Specify the prefix list to filter prefixes in routing updates
followed by the keyword out.
connected (OPTIONAL) Enter the keyword connected for directly
connected routing processes.
ospf process-id (OPTIONAL) Enter the keyword ospf followed by the OSPF
process-ID number. The range is 1 to 65535.
bgp as number (OPTIONAL) Enter the BGP followed by the AS Number. The
range is 1 to 65535.
rip (OPTIONAL) Enter the keyword rip for RIP routes.
static (OPTIONAL) Enter the keyword static for user-configured
routing process.
Defaults Not configured.
Command
Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
You can assign a name to a routing process so a prefix list IS applied to only the
routes derived from the specified routing process.
Related
Commands
• distribute-list in – filters the networks received in updates.
• redistribute – redistributes routes from one routing domain to another routing
domain.
818
Intermediate System to Intermediate System (IS-IS)