Reference Guide

trust rate. For example, a weight of 255 is interpreted that the routing information
source is not trustworthy and should be ignored.
distribute-list in
Filter network prefixes received in updates.
S5000
Syntax
distribute-list [prefix-list-name] in [interface-type slot/
port]
To return to the default values, use the no distribute-list prefix-list-
name
in [interface-type slot/port] command.
Parameters
prefix-list-
name in
Specify the prefix list to filter prefixes in routing updates
followed by the keyword in.
interface-type
slot/port
(OPTIONAL) Enter the interface type and slot/port or number
information. Valid slot numbers are 0-11. The valid port
numbers for each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel
followed by a number from 1 to 128.
• For a VLAN interface, enter the keyword vlan followed
by a VLAN id number from 1 to 4094.
Defaults Not configured.
Command
Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
• distribute-list out – suppresses networks from being advertised in updates.
• redistribute – redistributes routes from one routing domain to another routing
domain.
Intermediate System to Intermediate System (IS-IS)
817