Reference Guide

Command
History
Version 9.0(1.3) Introduced on the S5000.
debug isis update-packets
Enable debugging on link state PDUs (LSPs) that are detected by a router.
S5000
Syntax
debug isis update-packets [interface-type slot/port]
To turn off debugging, use the no debug isis update-packets
[
interface-type slot/port] command.
Parameters
interface-type
slot/port
(OPTIONAL) Enter the interface type followed by slot/port or
number information. Valid slot numbers are 0-11. The valid
port numbers for each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
• For a VLAN interface, enter the keyword vlan followed
by a VLAN id number from 1 to 4094.
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
default-information originate
Generates a default route into an IS-IS routing domain and controls the distribution of default
information.
S5000
Syntax
default-information originate [always] [metric metric] [route-
map map-name]
814
Intermediate System to Intermediate System (IS-IS)