Reference Guide

clear isis
Restart the IS-IS process. All IS-IS data is cleared.
S5000
Syntax
clear isis [tag] {* | database | traffic}
Parameters
tag (Optional) Enter an alphanumeric string to specify the IS-IS
routing tag area.
* Enter the keyword * to clear all IS-IS information and restart
the IS-IS process. This command removes IS-IS neighbor
information and IS-IS LSP database information and the full
SPF calculation is done.
database Clears IS-IS LSP database information.
traffic Clears IS-IS counters.
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
clns host
Define a name-to-network service mapping point (NSAP) that you use with commands that require
NSAPs and system IDs.
S5000
Syntax
clns host name nsap
Parameters
name Enter an alphanumeric string to identify the name-to-NSAP
mapping.
nsap Enter a specific NSAP address that is associated with the
name parameter.
Defaults Not configured.
Command
Modes
ROUTER ISIS
Command
History
Version 9.0(1.3) Introduced on the S5000.
810
Intermediate System to Intermediate System (IS-IS)