Reference Guide

When you use the no iscsi target port command and the TCP port to be
deleted is one bound to a specific IP address, the IP address value must be
included in the command.
show iscsi
Display the currently configured iSCSI settings.
S5000
Syntax
show iscsi
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Example
Dell#show iscsi
iSCSI is enabled
iSCSI session monitoring is disabled
iSCSI COS : dot1p is 4 no-remark
Session aging time: 10
Maximum number of connections is 256
------------------------------------------------
iSCSI Targets and TCP Ports:
------------------------------------------------
TCP Port Target IP Address
3260
860
Related
Commands
• show iscsi session – displays information about active iSCSI sessions on the
switch.
• show iscsi session detailed – displays detailed information about active iSCSI
sessions on the switch.
• show run iscsi – shows run iscsi.
show iscsi session
Display information about active iSCSI sessions on the switch.
S5000
Syntax
show iscsi session
iSCSI Optimization
803