Reference Guide

* a board RMA. Proceed with

caution ! *

***************************************************************

********

Proceed upgrade Boot Flash image for stack-unit 0 [yes/no]: yes

Programming

!!.!.!!.!.!!.!.!.!!.!.!!.!.!.!!.!.!.!!.!.!!.!.!.!!.!.!.!!.!.!!.

!.!!.!.!!.!.!.!!.!.!!.!.!!.!.!.!!.!.!!.!.!.!!.!May 14

19:23:21: %STKUNIT0-M:CP %SYSADM-5-CPU_THRESHOLD: Overall cpu

usage of management-unit is above threshold. Cpu1minUsage (88%)

May 14 19:23:21: %STKUNIT0-M:CP %SYSADM-5-TASK_CPU_THRESHOLD:

1min cpu utilization of management-unit has exceeded the

threshold. Top three processes are sysdlp (79.60%), system

(7.33%), sysd (1.11%)

.!!.!.!!.!.!.!!.!.!.!!.!.!!.!.!.!!.!.!!.!.!.!!.!.!!.!.!!.!.!.!.

!!.!.!!.!.!!.!.!.!!.!.!!.!.!.!!.!.!.!!.!.!!.!.!.!!.!.!!.!.!!.!.

!.!.!!.!.!!.!.!.!!.!.!.!!.!.!!.!.!!.!.!.!!.!.!!.!.!.!!.!.!!.!.!

!.!.!.!!.!.!.!!.!.!.!

Bootflash image upgrade for stack-unit 0 completed

successfully.

upgrade system (standalone unit)

Upgrade the Dell Networking OS image on a standalone S5000 switch.

S5000

Syntax

upgrade system {flash://file-path | ftp://file-path | scp://

file-path | tftp://file-path | usbflash://file-path} {A: | B:}

Parameters

system Enter the keyword system to change the Dell Networking

OS image.

flash: After the keyword flash:, enter the location of the source

file in the internal flash in the format:

//file-path or press

Enter to launch a prompt sequence.

ftp: After the keyword ftp:, enter the location of the source file

in the format: //userid:password@host-ipaddress/

file-path or press Enter to launch a prompt sequence.

scp: After the keyword scp:, enter the location of the source file

in the format: //userid:password@host-ip-address/

file-path or press Enter to launch a prompt sequence.

tftp: After the keyword tftp:, enter the location of the source

file in the format:

//host-ip-address/file-path or

press Enter to launch a prompt sequence.

File Management