Reference Guide

show ip bgp ipv6 unicast summary
Allows you to view the status of all BGP connections.
S5000
Syntax
show ip bgp ipv6 unicast summary
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following describes the show ip bgp ipv6 unicast summary command
shown in the Example below.
Field Description
BGP router
identifier
Displays the local router ID and the AS number.
BGP table
version
Displays the BGP table version and the main routing table
version.
network entries Displays the number of network entries, route paths, and the
amount of memory used to process those entries.
BGP path
attribute entries
Displays the number of BGP path attributes and the amount
of memory used to process them.
BGP AS-PATH
entries
Displays the number of BGP AS_PATH attributes processed
and the amount of memory used to process them.
BGP
community
entries
Displays the number of BGP COMMUNITY attributes
processed and the amount of memory used to process
them. The show ip bgp ipv6 unicast community
command provides more details on the COMMUNITY
attributes.
Dampening
enabled
Displayed only when dampening is enabled. Displays the
number of paths designated as history, dampened, or
penalized.
Neighbor Displays the BGP neighbor address.
AS Displays the AS number of the neighbor.
MsgRcvd Displays the number of BGP messages that neighbor
received.
MsgSent Displays the number of BGP messages that neighbor sent.
TblVer Displays the version of the BGP table that was sent to that
neighbor.
796
IPv6 Border Gateway Protocol (IPv6 BGP)