Reference Guide

Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
You must reload the switch after entering the upgrade boot command to boot
up the switch with the new boot code.
Example
Dell#upgrade boot bootselector-image stack-unit 0 booted
Password:
Current BootSelector information in the system:
===============================================
Card BootSelector Current Version
New Version
---------------------------------------------------------------
---------
Unit0 Boot Selector
1.3.0.0 1.3.0.1
***************************************************************
********
* Warning - Upgrading boot selectors is inherently risky
and should *
* only be attempted when necessary. A failure at this
upgrade may *
* cause a board RMA. Proceed with
caution ! *
***************************************************************
********
Proceed upgrade Boot Selector image for stack-unit 0 [yes/no]:
yes
Programming
!.!!.!.!.!!.!.!!.!.!!.!.!.!!.!.!.!!.!.!!.!.!.!!.!.!!.!.!.!!.!.!
!.!.!.!!.!.!.!.
Bootselector image upgrade for stack-unit 0 completed
successfully.
Dell#upgrade boot bootflash-image stack-unit 0 booted
Current BootFlash information in the system:
===============================================
Card BootFlash Current Version
New Version
---------------------------------------------------------------
---------
Unit0 Boot Flash B
1.3.1.1 1.3.1.2
***************************************************************
********
* Warning - Upgrading boot flash is inherently risky and
should only *
* be attempted when necessary. A failure at this upgrade
may cause *
File Management
79