Reference Guide

Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following describes the show ip bgp ipv6 unicast command shown in
the Example below.
Field Description
Network Displays the destination network prefix of each BGP route.
Next Hop Displays the next hop address of the BGP router. If 0::0/0 is
listed in this column, local routes exist in the routing table.
Metric Displays the BGP route’s metric, if assigned.
LocPrf Displays the BGP LOCAL_PREF attribute for the route.
Weight Displays the route’s weight.
Path Lists all the ASs the route passed through to reach the
destination network.
Example
Dell#show ip bgp ipv6 unicast
BGP table version is 8, local router ID is 5.5.10.4
Status codes: s suppressed, S stale, d damped, h history, *
valid, > best Path source: I - internal, a
- aggregate, c - confed-external, r - redistributed, n -
network Origin codes: i - IGP, e - EGP, ? -
incomplete
Network Next Hop Metric LocPrf Weight Path
h dead:1::/100 5ffe:10::3 0 0 1 i
h 5ffe:11::3 0 0 1 i
*> dead:2::/100 5ffe:10::3 0 0 1 i
* 5ffe:11::3 0 0 1 i
*> dead:3::/100 5ffe:10::3 0 0 1 i
* 5ffe:11::3 0 0 1 i
h dead:4::/100 5ffe:10::3 0 0 1 i
h 5ffe:11::3 0 0 1 i
Dell#show ip bgp ipv6 unicast dead:3::/100
BGP routing table entry for dead:3::/100, version 3
Paths: (2 available, table Default-MBGP-Routing-Table.)
Not advertised to any peer
Received from :
5ffe:10::3 (5.5.5.3) Best
AS_PATH : 1
Next-Hop : 5ffe:10::3, Cost : 0
Origin IGP, Metric 0, LocalPref 100, Weight 0, external
5ffe:11::3 (5.5.5.3)
AS_PATH : 1
Next-Hop : 5ffe:11::3, Cost : 0
Origin IGP, Metric 0, LocalPref 100, Weight 0, external
Inactive reason: Peer IP address
Dell#
786
IPv6 Border Gateway Protocol (IPv6 BGP)