Reference Guide

debug ip bgp ipv6 unicast updates
View information about BGP updates.
S5000
Syntax
debug ip bgp ipv6 unicast ipv6-address prefix-length updates
[in | out]
Parameters
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the
prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
updates Enter the keyword updates to view BGP update
information.
in (OPTIONAL) Enter the keyword in to view only BGP updates
received from neighbors.
out (OPTIONAL) Enter the keyword out to view only BGP
updates sent to neighbors.
Defaults Disabled.
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
distance bgp
Define an administrative distance for routes.
S5000
Syntax
distance bgp external-distance internal-distance local-distance
To return to default values, use the no distance bgp command.
Parameters
external-
distance
Enter a number to assign to routes learned from a neighbor
external to the AS. The range is 1 to 255. The default is 20.
internal-
distance
Enter a number to assign to routes learned from a router
within the AS. The range is 1 to 255. The default is 200.
IPv6 Border Gateway Protocol (IPv6 BGP)
775