Reference Guide

Parameters
* Enter the character * to clear all peers.
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the
prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
dampening (OPTIONAL) Enter the keyword dampening to clear route
flap dampening information.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to reset
the flap statistics on all prefixes from that neighbor.
peer-group (OPTIONAL) Enter the keywords peer-group to clear all
members of a peer-group.
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
clear ip bgp ipv6 unicast dampening
Clear information on route dampening.
S5000
Syntax
clear ip bgp dampening ipv6 unicast [network network-mask]
Parameters
network (OPTIONAL) Enter the IPv6 network address in x:x:x:x::x
format.
network-mask If you enter the network address, next enter the network
mask, from 0 to 128.
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
772
IPv6 Border Gateway Protocol (IPv6 BGP)