Reference Guide

includes AS_PATH and community information from the
routes included in the aggregated route.
attribute-map
map-name
(OPTIONAL) Enter the keywords attribute-map followed
by the name of a configured route map to modify attributes
of the aggregate, excluding AS_PATH and NEXT_HOP
attributes.
summary-only (OPTIONAL) Enter the keywords summary-only to advertise
only the aggregate address. Specific routes are not
advertised.
suppress-map
map-name
(OPTIONAL) Enter the keywords suppress-map followed by
the name of a configured route map to identify which more-
specific routes in the aggregate are suppressed.
Defaults Not configured.
Command
Modes
ROUTER-BGPV6-ADDRESS FAMILY
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
At least one of the routes included in the aggregate address must be in the BGP
routing table for the configured aggregate to become active.
Do not add the as-set parameter to the aggregate. If routes within the aggregate
are constantly changing, the aggregate flaps to keep track of the changes in the
AS_PATH.
In route maps used in the suppress-map parameter, routes meeting the deny
clause are not suppress; in other words, they are allowed. The opposite is true:
routes meeting the permit clause are suppressed.
If the route is injected using the network command, that route stills appear in the
routing table if the
summary-only parameter is configured in the aggregate-
address command.
The summary-only parameter suppresses all advertisements. If you want to
suppress advertisements to only specific neighbors, use the neighbor
distribute-list command.
bgp dampening
Enable BGP route dampening and configure the dampening parameters.
S5000
Syntax
bgp dampening [half-life reuse suppress max-suppress-time]
[route-map map-name]
770
IPv6 Border Gateway Protocol (IPv6 BGP)