Reference Guide

address family
This command changes the context to subsequent address family identifier (SAFI).
S5000
Syntax
address family ipv6 unicast
To remove SAFI context, use the no address family ipv6 unicast
command.
Parameters
ipv6 Enter the keyword ipv6 to specify the address family as
IPv6.
unicast Enter the keyword unicast to specify multicast as SAFI.
Defaults IPv6 Unicast
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
After this command is executed, all subsequent commands apply to this address
family. You can exit from this AFI/SAFI to the IPv6 Unicast (the default) family by
entering the exit command and returning to the Router BGP context.
aggregate-address
Summarize a range of prefixes to minimize the number of entries in the routing table.
S5000
Syntax
aggregate-address ipv6-address prefix-length [advertise-map
map-name] [as-set] [attribute-map map-name] [summary-only]
[suppress-map map-name]
Parameters
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the
prefix length in the / x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
advertise-map
map-name
(OPTIONAL) Enter the keywords advertise-map followed
by the name of a configured route map to set filters for
advertising an aggregate route.
as-set (OPTIONAL) Enter the keywords as-set to generate path
attribute information and include it in the aggregate. AS_SET
IPv6 Border Gateway Protocol (IPv6 BGP)
769