Reference Guide

Defaults Not configured.
Command
Modes
ROUTER BGP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
When a peer group is created, it is disabled (shut mode).
Related
Commands
neighbor peer-group (assigning peers) – assigns routers to a peer group.
neighbor remote-as – assigns a indirectly connected AS to a neighbor or peer
group.
neighbor shutdown – disables a peer or peer group.
neighbor peer-group passive
Enable passive peering on a BGP peer group; that is, the peer group does not send an OPEN message,
but does respond to one.
S5000
Syntax
neighbor peer-group-name peer-group passive
To delete a passive peer-group, use the no neighbor peer-group-name
peer-group passive command.
Parameters
peer-group-
name
Enter a text string up to 16 characters long as the name of
the peer group.
Defaults Not configured.
Command
Modes
ROUTER BGP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
After you configure a peer group as passive, you must assign it a subnet using the
neighbor subnet command.
Related
Commands
neighbor subnet – assigns a subnet to a dynamically configured BGP neighbor.
738
IPv6 Border Gateway Protocol (IPv6 BGP)