Reference Guide

Routes from confederations are treated as internal BGP routes.
maximum-paths
Configure the maximum number of parallel routes (multipath support) BGP supports.
S5000
Syntax
maximum-paths {ebgp | ibgp} number
To return to the default values, use the no maximum-paths command.
Parameters
ebgp Enter the keyword ebgp to enable multipath support for
External BGP routes.
ibgp Enter the keyword ibgp to enable multipath support for
Internal BGP routes.
number Enter a number as the maximum number of parallel paths.
The range is 1 to 16. The default is 1.
Defaults 1
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
If you enable this command, use the capture bgp-pdu max-buffer-size
command to recompute the best path.
neighbor activate
This command allows the specified neighbor/peer group to be enabled for the current AFI/SAFI.
S5000
Syntax
neighbor {ipv6-address | peer-group-name} activate
To disable, use the no neighbor {ipv6-address | peer-group-name}
activate
command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
728
IPv6 Border Gateway Protocol (IPv6 BGP)