Reference Guide

Usage
Information
Entering a no debug ip bgp command removes all configured debug
commands for BGP.
default-metric
Allows you to change the metrics of redistributed routes to locally originated routes. Use this command
with the
redistribute command.
S5000
Syntax
default-metric number
To return to the default setting, use the no default-metric command.
Parameters
number Enter a number as the metric to be assigned to routes from
other protocols. The range is 1 to 4294967295.
Defaults 0
Command
Modes
ROUTER BGP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The default-metric command in BGP sets the value of the BGP
MULTI_EXIT_DISC (MED) attribute for redistributed routes only.
Related
Commands
bgp always-compare-med – enables comparison of all BGP MED attributes.
redistribute – redistributes routes from other routing protocols into BGP.
description
Enter a description of the BGP routing protocol.
S5000
Syntax
description {description}
To remove the description, use the no description {description} command.
Parameters
description Enter a description to identify the BGP protocol (80
characters maximum).
726
IPv6 Border Gateway Protocol (IPv6 BGP)