Reference Guide

NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group
peer-group-
name
(OPTIONAL) Enter the keywords peer-group followed by
the name of the peer group.
in (OPTIONAL) Enter the keyword in to view only inbound
keepalive messages.
out (OPTIONAL) Enter the keyword out to view only outbound
keepalive messages.
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Entering a no debug ip bgp command removes all configured debug
commands for BGP.
debug ip bgp notifications
Allows you to view information about BGP notifications received from neighbors.
S5000
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name]
notifications [in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name] notifications [in | out] command.
Parameters
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
followed by the prefix length in the /x format. The range is /0
to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group
peer-group-
name
(OPTIONAL) Enter the keywords peer-group followed by
the name of the peer group.
in (OPTIONAL) Enter the keyword in to view BGP notifications
received from neighbors.
out (OPTIONAL) Enter the keyword out to view BGP
notifications sent to neighbors.
724
IPv6 Border Gateway Protocol (IPv6 BGP)