Reference Guide

as-number Clear and reapply policies for all neighbors belonging to the
AS. The range is 0 to 65535 (2-Byte) 1 to 4294967295 (4-
Byte) or 0.1 to .65535.65535 (Dotted format).
ipv4-neighbor-
addr | ipv6-
neighbor-addr
Clear and reapply policies for a neighbor.
peer-group
name
Clear and reapply policies for all BGP routers in the specified
peer group.
ipv6 unicast Clear and reapply policies for all IPv6 unicast routes.
in Reapply only inbound policies.
NOTE: If you enter soft, without an in or out option,
both inbound and outbound policies are reset.
out Reapply only outbound policies.
NOTE: If you enter soft, without an in or out option,
both inbound and outbound policies are reset.
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
debug ip bgp
Allows you to view all information on BGP, including BGP events, keepalives, notifications, and updates.
S5000
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name] [in |
out]
To disable all BGP debugging, use the no debug ip bgp command.
Parameters
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
followed by the prefix length in the /x format. The range is /0
to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group
peer-group-
name
Enter the keywords peer-group followed by the name of
the peer group.
720
IPv6 Border Gateway Protocol (IPv6 BGP)