Reference Guide

| soft {in | out}} | ipv6 unicast {flap-statistics | soft {in |
out}| soft [in | out]
Parameters
ipv6-address Enter an IPv6 address to reset neighbors belonging to that IP.
Used without a qualifier, the keyword ipv6–address resets
all neighbors belonging to that IP.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to clear
all flap statistics belonging to that AS or a specified address
family within that IP.
ipv4 (OPTIONAL) Enter the keyword ipv4 to select options for
that address family.
ipv6 (OPTIONAL) Enter the keyword ipv6 to select options for
that address family.
unicast (OPTIONAL) Enter the keyword unicast to select the
unicast option within the selected address family.
multicast (OPTIONAL) Enter the keyword multicast to select the
multicast option within the selected address family. Multicast
is supported on IPv4 only.
soft (OPTIONAL) Enter the keyword soft to configure and
activate policies without resetting the BGP TCP session; that
is, BGP Soft Reconfiguration.
NOTE: If you enter clear ip bgp ip6-address
soft, both inbound and outbound policies are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound
policies.
out (OPTIONAL) Enter the keyword out to activate only
outbound policies.
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
clear ip bgp peer-group
Reset a peer-group’s BGP sessions.
S5000
Syntax
clear ip bgp peer-group peer-group-name
IPv6 Border Gateway Protocol (IPv6 BGP)
717