Reference Guide

clear ip bgp * (asterisk)
Reset all BGP sessions in the specified category on the S5000. The soft parameter (BGP Soft
Reconfiguration) clears the policies without resetting the TCP connection.
S5000
Syntax
clear ip bgp * [ipv4 multicast soft [in | out] | ipv6 unicast
soft [in | out] | soft [in | out]]
Parameters
* Enter an asterisk ( * ) to reset all BGP sessions.
ipv4 multicast
soft [in | out]
(OPTIONAL) Enter the keywords ipv4 multicast soft
[in | out] to set options within the specified IPv4 address
family.
ipv6 unicast
soft [in | out]
(OPTIONAL) Enter the keywords ipv6 multicast soft
[in | out] to set options within the specified IPv6 address
family.
soft (OPTIONAL) Enter the keyword soft to configure and
activate policies without resetting the BGP TCP session, that
is, BGP Soft Reconfiguration.
NOTE: If you enter clear ip bgp ip6-address
soft
, both inbound and outbound policies are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound
policies.
out (OPTIONAL) Enter the keyword out to activate only
outbound policies.
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
clear ip bgp as-number
Reset BGP sessions on the S5000. The soft parameter (BGP Soft Reconfiguration) clears the policies
without resetting the TCP connection.
S5000
Syntax
clear ip bgp as-number [flap-statistics | ipv4 {multicast
{flap-statistics | soft {in | out}} | unicast {flap-statistics
| soft {in | out}} | ipv6 unicast {flap-statistics | soft {in |
out}| soft [in | out]
IPv6 Border Gateway Protocol (IPv6 BGP)
715