Reference Guide

Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
capture bgp-pdu neighbor (ipv6) – enables route reflection between the route
reflector and the clients.
show capture bgp-pdu neighbor – configures a route reflector and clients.
capture bgp-pdu neighbor (ipv6)
Enable capture of an IPv6 BGP neighbor packet.
S5000
Syntax
capture bgp-pdu neighbor ipv6-address direction {both | rx |
tx}
To disable capture of the IPv6 BGP neighbor packet, use the no capture bgp-
pdu neighbor
ipv6-address command.
Parameters
ipv6-address Enter the IPv6 address of the target BGP neighbor.
direction {both
| rx | tx}
Enter the keyword direction and a direction— either rx
for inbound, tx for outbound, or both.
Defaults Not configured.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
capture bgp-pdu max-buffer-size – enables route reflection between the route
reflector and the clients.
show capture bgp-pdu neighbor – configures a route reflector and clients.
capture bgp-pdu neighbor – enables capture of an IPv4 BGP neighbor packet.
714
IPv6 Border Gateway Protocol (IPv6 BGP)