Reference Guide

show ip bgp ipv6 unicast cluster-list – views paths with a cluster ID.
bgp confederation identifier
Configure an identifier for a BGP confederation.
S5000
Syntax
bgp confederation identifier as-number
To delete a BGP confederation identifier, use the no bgp confederation
identifier as-number command.
Parameters
as-number Enter the AS number. The range is 1 to 65535.
Defaults Not configured.
Command
Modes
ROUTER BGP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The autonomous systems configured in this command are visible to the EBGP
neighbors. Each autonomous system is fully meshed and contains a few
connections to other autonomous systems. The next hop, MED, and local
preference information is preserved throughout the confederation.
Dell Networking OS accepts confederation EBGP peers without a LOCAL_PREF
attribute. The software sends AS_CONFED_SET and accepts AS_CONFED_SET and
AS_CONF_SEQ.
bgp confederation peers
Specify the autonomous systems (ASs) that belong to the BGP confederation.
S5000
Syntax
bgp confederation peers as-number [...as-number]
To remove bgp confederation peers, use the no bgp confederation peer
command.
Parameters
as-number Enter the AS number. The range is 1 to 65535.
...as-number (OPTIONAL) Enter up to 16 confederation numbers. The
range is 1 to 65535.
704
IPv6 Border Gateway Protocol (IPv6 BGP)