Reference Guide

Defaults Disabled.
Command
Modes
ROUTER BGP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The software compares the MEDs only if the path contains no external
autonomous system numbers.
If you enable this command, use the capture bgp-pdu max-buffer-size *
command to recompute the best path.
bgp bestpath med missing-as-best
During path selection, indicate a preference to paths with missing MED (MULTI_EXIT_DISC) over those
paths with an advertised MED attribute.
S5000
Syntax
bgp bestpath med missing-as-best
To return to the default selection, use the no bgp bestpath med missing-as-
best
command.
Defaults Disabled.
Command
Modes
ROUTER BGP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The MED is a 4-byte unsigned integer value and the default behavior is to assume a
missing MED as 4294967295. This command causes a missing MED to be treated
as 0. During path selection, paths with a lower MED are preferred over those with a
higher MED.
bgp client-to-client reflection
Allows you to enable route reflection between clients in a cluster.
S5000
Syntax
bgp client-to-client reflection
To disable client-to-client reflection, use the no bgp client-to-client
reflection command.
702
IPv6 Border Gateway Protocol (IPv6 BGP)