Reference Guide

C 2004::/32 [0/0]
Direct, Te 1/1, 00:28:49
L fe80::/10 [0/0]
Direct, Nu 0, 00:29:09
Example
(Summary)
Dell#show ipv6 route summary
Route Source Active Routes Non-active Routes
connected 5 0
static 0 0
Total 5 0
Total 5 active route(s) using 952 bytes
trust ipv6-diffserv
Allows the dynamic classification of IPv6 DSCP.
S5000
Syntax
trust ipv6-diffserv
To remove the definition, use the no trust ipv6-diffserv command.
Defaults none
Command
Modes
CONFIGURATION-POLICY-MAP-IN
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
When you configure trust IPv6 diffserv, matched bytes/packets counters are not
incremented in the show qos statistics command.
Trust diffserv (IPv4) can co-exist with trust ipv6-diffserv in an Input Policy Map.
Dynamic classification happens based on the mapping as shown between the IPv6
Serivce Class Field (on left) and the Queue ID (on right)):
IPv6 Service
Class Field
Description
111XXXXX — 7 7
110XXXXX — 6 6
101XXXXX — 5 5
100XXXXX — 4 4
011XXXXX — 3 3
010XXXXX — 2 2
001XXXXX — 1 1
IPv6 Basics
697