Reference Guide

Related
Commands
ipv6 flowlabel-zero – Configure IPv6 address auto-configuration for the
management interface.
show ipv6 fib stack-unit
View all FIB entries.
S5000
Syntax
show ipv6 fib stack-unit unit-number [summary | ipv6-address]
Parameters
stack-unit unit-
number
Enter the keyword stack-unit followed by the unit
number. The range is 0 to 11.
summary (OPTIONAL) Enter the keyword summary to view a summary
of entries in IPv6 cam.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display
networks that have more specific prefixes. The range is /0
to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Host tables are not stored in CAM tables on the S5000. Entries for camIndex
displays as zero (0) on the show ipv6 fib stack-unit output for neighbor
entries, such as address resolution protocol (ARP) entries.
show ipv6 flowlabel-zero
Display the flow label zero setting.
S5000
Syntax
show ipv6 flowlabel-zero
Default Disabled
IPv6 Basics
691