Reference Guide

index (OPTIONAL) Enter the index in the IPv6 CAM.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display
networks that have more specific prefixes. The range is /0
to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
On the S5000, First-Hop information is not shown for installed routes in the IPv6
content addressable memory (CAM). However, the same is shown in the
forwarding information base (FIB).
NOTE: If a route has a mask greater than 64, no output is displayed and no
output is displayed for show ipv6 cam stack-unit unit-number port-
set {0-1} ipv6-address, but an equivalent /64 entry would be listed in
the
show ipv6 cam stack-unit unit-number port-set {0-1}
output. Similarly, if there is more than one ECMP object with a destination
route that has a mask greater than 64, if the first 64 bits in the destination
routes of the ECMP objects are the same, only one route is installed in CAM
even though multiple ECMP path entries exist.
NOTE: On the S5000, the self address is displayed in the neighbor portion for
the show ipv6 cam stack-unit unit-number port-set command.
show ipv6 control-plane icmp
Displays the status of the icmp control-plane setting for the error eate limit setting.
S5000
Syntax
show ipv6 control-plane icmp
Default 100
Command
Modes
EXEC
Command
History
Version 9.0(1.3) Introduced on the S5000.
690
IPv6 Basics