Reference Guide

recursive resolution is “broken,” Dell Networking OS withdraws the route. The route
is re-installed, by Dell Networking OS, when the recursive resolution is satisfied.
After an IPv6 static route interface is created, if an IP address is not assigned to a
peer interface, the peer must be manually pinged to resolve the neighbor
information.
Example
Dell(conf)#ipv6 route 44::0 /64 33::1 ?
<1-255> Distance metric for this route
permanent Permanent route
tag Set tag for this route
Dell(conf)#ipv6 route 55::0 /64 ?
X:X:X:X::X Forwarding router's address
gigabitethernet Gigabit Ethernet interface
loopback Loopback interface
null Null interface
port-channel Port channel interface
tenGigabitethernet TenGigabit Ethernet interface
vlan VLAN interface
Dell(conf)#ipv6 route 55::0 /64 tengigabitethernet 9/0 ?
<1-255> Distance metric for this route
X:X:X:X::X Forwarding router's address
permanent Permanent route
tag Set tag for this route
Dell(conf)#ipv6 route 55::0 /64 tengigabitethernet 9/0 66::1 ?
<1-255> Distance metric for this route
permanent Permanent route
tag Set tag for this route
Dell#
Related
Commands
show ipv6 route – views the IPv6 configured routes.
show ipv6 cam stack-unit
Displays the IPv6 CAM entries for the specified stack-unit.
S5000
Syntax
show ipv6 cam stack-unit unit-number port-set {number} [summary
| index | ipv6 address]
Parameters
stack-unit unit-
number
Enter the keyword stack unit’ followed by the unit
number. The range is 0 to 11.
port-set Enter the keyword port pet followed by the port number.
Values are 0 or 1.
summary (OPTIONAL) Enter the keyword summary to display a table
listing network prefixes and the total number prefixes which
can be entered into the IPv6 CAM.
IPv6 Basics
689