Reference Guide

off-link Enter the keywords off-link to advertise the prefix without
stating to recipients that the prefix is either on-link or off-
link.
valid-lifetime |
infinite
Enter the amount of time that the prefix is advertised, or
enter infinite for an unlimited amount of time. The range
is 0 to 4294967295. The default is
2592000. The maximum
value means that the preferred lifetime does not expire for
the valid-life time parameter.
preferred-
lifetime |
infinite
Enter the amount of time that the prefix is preferred, or enter
infinite for an unlimited amount of time. The range is 0 to
4294967295. The default is 604800. The maximum value
means that the preferred lifetime does not expire.
Command
Modes
INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
By default, all prefixes configured as addresses on the interface are advertised. This
command allows control over the individual parameters per prefix; you can use the
default keyword to use the default parameters for all prefixes. If a prefix has been
configured with lifetime parameter values, the default values cannot be applied
using the
ipv6 nd prefix default no-autoconfig command.
ipv6 route
Establish a static IPv6 route.
S5000
Syntax
ipv6 route ipv6-address prefix-length {ipv6-address | interface
| interface ipv6-address} [distance] [tag value] [permanent]
To remove the IPv6 route, use the no ipv6 route ipv6-address prefix-
length {ipv6-address | interface | interface ipv6-address}
[
distance] [tag value] [permanent] command.
Parameters
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the
prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
interface (OPTIONAL) Enter the following keywords and slot/port or
number information:
IPv6 Basics
687