Reference Guide

To delete a match, use the no match ipv6 route-source prefix-list
prefix-list-name command.
Parameters
prefix-list
prefix-list-
name
Enter the keywords prefix-list followed by the name of
configured prefix list, up to 140 characters.
Defaults Not configured.
Command
Modes
ROUTE-MAP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
match ipv6 address – redistributes routes that match an IP address.
match ipv6 next-hop – redistributes routes that match the next-hop IP address.
route-map
Designate a IPv6 route map name and enter ROUTE-MAP mode.
S5000
Syntax
route-map map-name
To delete a route map, use the no route-map map-name command.
Parameters
map-name Enter a text string to name the route map, up to 140
characters.
Defaults Not configured.
Command
Modes
ROUTE-MAP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Example
Dell(conf)#route-map Rmap1
Dell(config-route-map)#match ?
…
ip IP specific information
ipv6 IPv6 specific information
…
Related
Commands
show config – views the current configuration.
678
IPv6 Access Control Lists (IPv6 ACLs)