Reference Guide

Example
Dell#test cam-usage service-policy input pmap_12 stack-unit all
Stack-| Portpipe| CAM Partn| Avail CAM| Est CAM/Port| Status
unit
--------------------------------------------------------------
2| 1| IPv4Flow| 232| 0| Allowed
2| 1| IPv6Flow| 0| 0| Allowed
4| 0| IPv4Flow| 232| 0| Allowed
4| 0| IPv6Flow| 0| 0| Allowed
Dell#
Dell#test cam-usage service-policy input pmap_12 stack-unit
4
port-set 0
Stack-| Portpipe| CAM Partn| Avail CAM| Est CAM/Port| Status
unit
--------------------------------------------------------------
4| 0| IPv4Flow| 232| 0| Allowed
4| 0| IPv6Flow| 0| 0| Allowed
Dell#
Dell#test cam-usage service-policy input pmap_12 stack-unit 2
port-set 1
Stack-| Portpipe| CAM Partn| Avail CAM| Est CAM/Port| Status
unit
---------------------------------------------------------------
2| 1| IPv4Flow| 232| 0| Allowed
2| 1| IPv6Flow| 0| 0| Allowed
Dell#
IPv6 Route Map Commands
The following commands allow you to configure route maps and their redistribution criteria.
match ipv6 address
Configure a filter to match routes based on IPv6 addresses specified in an access list.
S5000
Syntax
match ipv6 address prefix-list-name
To delete a match, use the no match ipv6 address prefix-list-name
command.
Parameters
prefix-list-
name
Enter the name of IPv6 prefix list, up to 140 characters.
Defaults Not configured.
676
IPv6 Access Control Lists (IPv6 ACLs)